173
T h e P a t t e r n J o b s
11
08 : Chord Separate
Shifts each note in the specified measure range which falls on the
same beat (i.e. chords) forward in order from lowest to highest or vice
versa according to the Chord Sort settings, by the specified number of
clocks, thus “separating” the chord notes by the specified number of
clocks.
The “TR” parameter selects the track to be affected by the Chord
Separate job: D1, D2, PC, BA, C1, C2, C3, C4.
The “M” parameters above the graphic bar are used to specify the
first measure:beat and last measure:beat of the range to be modified.
The “Clock” parameter determines the number of clocks by which
the notes of the chord will be separated: “000” through “999”.
After setting the parameters as required press [ENTER] to execute
the Chord Separate job. The metronome icon will appear on the display
while the data is being processed, then “Completed” will appear briefly
when the job is done. Press the [EXIT] key to return to the job list, or a
mode key to go directly to the selected mode.
First beat.
First measure. Last measure.
Last beat.
To Next Page
Loading...
Need help?
General
