7 operator LCD display station interfaces
92
• The number of operating hours is shown approximately by a number of chips under the cor-
responding date and a time span:
■
■■
■■■
■■■■
0.5~2.0h
2.0~4.0h
4.0~8.0h
8.0h <
Hours of machine use for the selected day:
The hours of machine operation are displayed as follows:
1= Number of hours in the morning.
2= Number of hours in the afternoon.
3= Total operating hours for the day.
7.5 Configuration interface
This interface allows you to change the settings shown in the table below.
Language:
Changes the language used by the various interfaces.
Date and time setting:
If the battery in the machine is removed, the date and time settings will be
reset.
Sound parameter:
Adjusts the monitor to emit a confirmation sound when a button is pres-
sed. The buzzer sounds when the settings are changed or when a malfunc-
tion is detected can not be removed.
Brightness setting:
Adjusts the brightness of LED visual indicators and the LCD screen when
the work light is in operation.
7.4 Machine usage management interface
• This interface allows you to check the machine hours of operation over a period of 90 days.
Hours of machine use for the selected month:
To Next Page
Loading...
Need help?
General
