7 Options
46
7.15 Radio
Refer to the user manual supplied with the
radio.
2= Radio
7.16 Quick coupler
CAUTION
Before any connection or disconnection of the hydraulic hoses, remove the residual pres-
sure from the hydraulic circuit.
2.1.2 Removing the residual pressure, page 131
Connecting
1. Insert the adapter into the receiver.A slight
click indicates that the connection is success-
ful. The ball is released from the adapter
groove located on the receiver.
2. Turn the adapter on the receiver to secure
the connection.
Note
Before each use, clean the receiver
surfaces.
disconnecting
To disconnect, turn the adapter to align the ball with the groove located on the receiver and slide
the adapter backwards.
Note
The hydraulic connection locking system may vary depending on the model fitting
installed.
To Next Page
Loading...
Need help?
General
