EasyManua.ls Logo

Yanmar SV26 - Working in a Muddy Area; Working in an Area with Reduced Visibility

Yanmar SV26
205 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2 Usage precautions
75
the following procedures.
1. Place the bucket on the muddy side.
2. Lift the track.
3. Place wood or a wedge under the track
runners.
4. Raise the bucket.
IMPORTANT
When you raise the machine, support yourself on the ground with the lower part of the
bucket (and not with the teeth). The angle between the boom and the arm must be 90° to
110°.
If both tracks are stuck
1. Place a log or piece of wood under the
tracks.
2. Push the bucket into the firm ground.
3. Retract the arm as if to dig and move for-
ward with the side movement levers to get out
of the mud.
2.3.11 Working in an area with reduced visibility
When working in a dimly-lit area, switch on the lights and front headlights and provide addi-
tional lighting if necessary.
Stop all work when fog, snow or rain hinders your visibility.
2.3.10 Working in a muddy area
Operate the machine carefully so that it does not get stuck. If it does get stuck, release it using
If only one track is stuck

Table of Contents

Related product manuals