2 Usage precautions
64
Keep the headlights and mirrors clean
• To clean the cab exterior:
• Be sure to keep three points of support with the ma-
chine when cleaning the external elements (e.g. mirrors).
• Use the support points identified in the illustration
opposite.
• If 3 points of stable support are not accessible for
cleaning or maintenance of the external elements, use
adapted equipment in order to safely work on the
machine.
• Check that your machine is fitted with headlights and specific working lamps and that they
are working correctly.
WARNING
The projector becomes very hot when it is working. Never touch it with bare hands until
it has cooled down to avoid any risk of burning.
2.1.3 Check the safety structures
• The standard machine is equipped with a Falling Objects Protection Structure (FOPS) on the
machine's roof.
• The protection structures mounted on the machine comply with the recommendations of ISO
12117-2 of 2008 (ROPS) and 10262 of 2000 (FOPS).
For the specifications of these structures, refer to the table below:
Type
Cabin
ROPS / TOPS
Weight (in conformity with CE stand-
ards) kg
3100
• For your safety, the machine includes a protection structure in the event of it turning over
(ROPS), for protection against falling objects (FOPS) and protection against side tipping
(TOPS).Never modify any of these structures' elements.
• If one of the safety structures is damaged, have it replaced immediately to avoid any injury.
Do not repair or modify it.
To Next Page
Loading...
Need help?
General
