EasyManuals Logo
Home>Yealink>IP Phone>SIP-T41S

Yealink SIP-T41S Administrator's Guide

Yealink SIP-T41S
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #214 background imageLoading...
Page #214 background image
Phone Customization
211
2-Mid-Range (only applicable to T54W/T46U/T46S/T46G/T29G phones)
Default
0
Supported
Devices
All color screen phones
Web UI
Dsskey > Line Key > Label Length
Parameter
features.shorten_linekey_label.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display the length of the line key label with 9 digits.
Note: It works only if “features.config_dsskey_length is set to 0 (Default).
Permitted
Values
0-Disabled, the line key label can display at most 8 digits.
1-Enabled, the line key label can display at least 9 digits.
Default
0
Supported
Devices
T54W, T46U, T46S, T46G, T29G
Label Alignment for Line/Ext Key Display
You can customize the line/Ext key label alignment.
This feature is only applicable to T54W/T46U/T46S/T46G/T29G phones and expansion module EXP50 (connected
to the T57W/T54W/T53W/T53 phones)/EXP43 (connected to the T48U/T46U/T43U phones).
The following figures show the line key label alignment on T46S/G phones:
Topic
Label Alignment Display Configuration
Label Alignment Display Configuration
The following table lists the parameter you can use to configure the label alignment display.
Parameter
phone_setting.dsskey_label.display_method <y0000000000xx>.cfg
Description
It configures the alignment mode of the line key/Ext key label.
Note: If some Ext keys already exist before configuration, you need to refresh the page (press the
page keys, or try re-connecting the expansion module) to make the change take effect.
Permitted
Values
0-the label and icon align left
1-when the line key/Ext key is on the left side of the screen, the label and icon align left; when the line
key/Ext key is on the right side of the screen, the label and icon align right

Table of Contents

Other manuals for Yealink SIP-T41S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T41S and is the answer not in the manual?

Yealink SIP-T41S Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Keypad illuminationYes
Wi-FiNo
Networking standardsIEEE 802.3af
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Supported network protocolsSIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Volume controlDigital
Number of programmable keys6
Lines quantity6 lines
Phonebook capacity1000 entries
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Input frequency50/60 Hz
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Display diagonal2.7 \
Display resolution192 x 64 pixels
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Voice codecsCNG, G.711Mu, G.711a, G.723.1, G.726, G.729ab, VAD, iLBC
CertificationCE
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth189 mm
Width212 mm
Height175 mm
Package depth223 mm
Package width246 mm
Package height120 mm

Related product manuals