Yealink SIP-T41S Administrator's Guide

Call Features
352
Attributes Description
Prefix Specify the number to be replaced.
Replace Specify the alternate string instead of what the user enters.
LineID
Specify a registered line to apply the replace rule.
Valid Values: 0~16
0, 1 (for CP920)
0 stands for all lines;
1~16 stand for line1~line16 (vary by phone models:
T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G: 1~16; T53W/T53/T43U/T42U/T42S/T42G: 1~12;
T41P/T41S/T27G: 1~6; T40P/T40G/T23P/T23G: 1~3; T21(P) E2: 1~2; CP920: 1)
Multiple line IDs are separated by commas.
Note: This is not applicable to T19(P) E2 phones.
Customizing the Replace Rule File
1.
Open the replace rule file.
2.
To add a replace rule, add <Data Prefix="" Replace="" LineID="" / > to the file. Each starts on a new line.
3.
Specify the values within double quotes.
For example,
<Data Prefix="2512" Replace="05922512" LineID="1" / >
4.
Save the changes and place this file to the provisioning server.
Dial Now File Customization
The dial now file helps create multiple dial now rules. At most 100 dial now rules can be added to the IP phone. It is
not applicable to T19(P) E2 phones.
You can ask the distributor or Yealink FAE for dial now file template. You can also obtain the dial now file template
online: http://support.yealink.com/documentFront/forwardToDocumentFrontDisplayPage.
Topics
Dial Now File Attributes
Customizing the Dial Now File
Dial Now File Attributes
The following table lists the attributes you can use to add dial-now rules to the dial now file:
Attributes Description
DialNowRule Specify the dial-now number.
LineID
Specify a registered line to apply the dial-now rule.
Valid Values: 0~16
0, 1 (for CP920)
0 stands for all lines;
1~16 stand for line1~line16 (vary by phone models:
T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G: 1~16; T53W/T53/T43U/T42U/T42S/T42G:
1~12; T41P/T41S/T27G: 1~6; T40P/T40G/T23P/T23G: 1~3; T21(P) E2: 1~2; CP920: 1)
Multiple line IDs are separated by commas.

Yealink SIP-T41S Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Keypad illumination	Yes
Wi-Fi	No
Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Supported network protocols	SIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Volume control	Digital
Number of programmable keys	6
Lines quantity	6 lines
Phonebook capacity	1000 entries
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Input frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
AC adapter output current	1.2 A
AC adapter output voltage	5 V
Display diagonal	2.7 \
Display resolution	192 x 64 pixels
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Voice codecs	CNG, G.711Mu, G.711a, G.723.1, G.726, G.729ab, VAD, iLBC
Certification	CE
Cables included	LAN (RJ-45)
Number of handles included	1 pc(s)
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	189 mm
Width	212 mm
Height	175 mm
Package depth	223 mm
Package width	246 mm
Package height	120 mm