EasyManuals Logo
Home>Yealink>IP Phone>SIP-T41S

Yealink SIP-T41S Administrator's Guide

Yealink SIP-T41S
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #265 background imageLoading...
Page #265 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
262
Example: Setting a Line Key as BLF List Key
The following example shows the configuration for a BLF List key.
Scenario Conditions Related Topic
phone_setting.auto_blf_list_enable = 0 BLF List Configuration
Example
linekey.1.type = 39
linekey.1.line =1
After provisioning, a BLF List key displays on line key 1. You can easily use this key to monitor a remote line. The
monitored line depends on a pre-configured SIP server.
Example: Setting a Line Key as Private Hold Key
The following example shows the configuration for a Private Hold key.
Example
linekey.1.type = 20
linekey.1.label =Private Hold
After provisioning, you can press the line key 1 to hold calls without notifying other phones registered with the
shared line, the shared line displays active to others shared line. It is only applicable to Shared Line Appearance.
Example: Setting a Line Key as Multicast Paging Key
The following example shows the configuration for a Multicast Paging key.
Example
linekey.1.type = 24
linekey.1.value = 224.5.6.20:10008
linekey.1.label = Sales
linekey.1.extension = 2
After provisioning, you can press the line key 1 to send announcements quickly to the Sales group.
Programmable Keys
You can customize programmable keys on the phone to enable users to access frequently used functions, or, if
your phone does not have a particular hard key, you can create a soft key. For example, if the phone does not have
a Do Not Disturb hard key, you can create a Do Not Disturb soft key.
The programmable key takes effect only when the IP phone is idle.
Topics
Supported Programmable Keys
Programmable Keys Configuration
Supported Programmable Keys
The following tables list programmable keys for each phone model.

Table of Contents

Other manuals for Yealink SIP-T41S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T41S and is the answer not in the manual?

Yealink SIP-T41S Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Keypad illuminationYes
Wi-FiNo
Networking standardsIEEE 802.3af
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Supported network protocolsSIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Volume controlDigital
Number of programmable keys6
Lines quantity6 lines
Phonebook capacity1000 entries
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Input frequency50/60 Hz
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Display diagonal2.7 \
Display resolution192 x 64 pixels
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Voice codecsCNG, G.711Mu, G.711a, G.723.1, G.726, G.729ab, VAD, iLBC
CertificationCE
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth189 mm
Width212 mm
Height175 mm
Package depth223 mm
Package width246 mm
Package height120 mm

Related product manuals