Yealink SIP-T41S Administrator's Guide

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
62
Devices
Web UI
Network > Advanced > VPN > Mode
Parameter
static.network.l2tp_server.address
[1]
<y0000000000xx>.cfg
Description
It configures the L2TP server address.
Note: It works only if "static.network.vpn.mode" is set to 0 (L2TP).
Permitted
Values
String within 512 characters
Default
Blank
Supported
Devices
T57W, T54W, T53W, T53, T48U, T46U, T43U, T42U, T48S, T46S, T42S, T41S, T27G and CP920
Web UI
Network > Advanced > VPN > Layer 2 Tunneling Protocol(L2TP) > L2TP Server Address
Parameter
static.network.l2tp_server.username
[1]
<y0000000000xx>.cfg
Description
It configures the user name of the L2TP server.
Note: It works only if "static.network.vpn.mode" is set to 0 (L2TP).
Permitted
Values
String within 512 characters
Default
Blank
Supported
Devices
T57W, T54W, T53W, T53, T48U, T46U, T43U, T42U, T48S, T46S, T42S, T41S, T27G and CP920
Web UI
Network > Advanced > VPN > Layer 2 Tunneling Protocol(L2TP) > Authentication Name
Parameter
static.network.l2tp_server.password
[1]
<y0000000000xx>.cfg
Description
It configures the password of the L2TP server.
Note: It works only if "static.network.vpn.mode" is set to 0 (L2TP).
Permitted
Values
String within 512 characters
Default
Blank
Supported
Devices
T57W, T54W, T53W, T53, T48U, T46U, T43U, T42U, T48S, T46S, T42S, T41S, T27G and CP920
Web UI
Network > Advanced > VPN > Layer 2 Tunneling Protocol(L2TP) > Authentication Password
[1]
If you change this parameter, the phone will reboot to make the change take effect.
Example: Using VPN based on L2TP Prototol
Before you begin
You have set up the L2TP VPN server.
Procedure
1.
Set the following parameters in the configuration file and perform an auto provisioning.
#Set the VPN type to L2TP.
static.network.vpn.mode = 0
#Configure the address, user name, and password of the L2TP server.
static.network.l2tp_server.address = 192.168.10.25

Yealink SIP-T41S Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Keypad illumination	Yes
Wi-Fi	No
Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Supported network protocols	SIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Volume control	Digital
Number of programmable keys	6
Lines quantity	6 lines
Phonebook capacity	1000 entries
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Input frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
AC adapter output current	1.2 A
AC adapter output voltage	5 V
Display diagonal	2.7 \
Display resolution	192 x 64 pixels
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Voice codecs	CNG, G.711Mu, G.711a, G.723.1, G.726, G.729ab, VAD, iLBC
Certification	CE
Cables included	LAN (RJ-45)
Number of handles included	1 pc(s)
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	189 mm
Width	212 mm
Height	175 mm
Package depth	223 mm
Package width	246 mm
Package height	120 mm