EasyManuals Logo
Home>Yealink>IP Phone>SIP-T41S

Yealink SIP-T41S Administrator's Guide

Yealink SIP-T41S
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #249 background imageLoading...
Page #249 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
246
When using multiple keyboards, you can tap to change the language of the keyboard.
Notification Popups
Notification popups feature allows the IP phone to pop up the message when it misses a call, forwards an incoming
call to another party, receives a new voice mail or a new text message.
The following shows an example of receiving a new voice mail:
Topic
Notification Popups Configuration
Notification Popups Configuration
The following table lists the parameters you can use to configure notification popups.
Parameter
features.voice_mail_popup.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to pop up the message when it receives a new voice mail.
If the message disappears, it will not pop up again unless the phone receives a new voice mail or the
user re-registers the account that has unread voice mail(s).
Note: It works only if “account.X.display_mwi.enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
1
Web UI
Features > Notification Popups > Display Voice Mail Popup
Parameter
features.missed_call_popup.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to pop up the message when it misses a call.
Note: It works only if “account.X.missed_calllog is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
1
Web UI
Features > Notification Popups > Display Missed Call Popup
Parameter
features.forward_call_popup.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to pop up the message when it forwards an incoming call to another
party.
Permitted
Values
0-Disabled
1-Enabled

Table of Contents

Other manuals for Yealink SIP-T41S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T41S and is the answer not in the manual?

Yealink SIP-T41S Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Keypad illuminationYes
Wi-FiNo
Networking standardsIEEE 802.3af
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Supported network protocolsSIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Volume controlDigital
Number of programmable keys6
Lines quantity6 lines
Phonebook capacity1000 entries
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Input frequency50/60 Hz
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Display diagonal2.7 \
Display resolution192 x 64 pixels
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Voice codecsCNG, G.711Mu, G.711a, G.723.1, G.726, G.729ab, VAD, iLBC
CertificationCE
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth189 mm
Width212 mm
Height175 mm
Package depth223 mm
Package width246 mm
Package height120 mm

Related product manuals