Yealink SIP-T41S Administrator's Guide

Troubleshooting Solutions
553
Troubleshooting Solutions
This section describes solutions to common issues that may occur while using the device. Upon encountering a
case not listed in this section, contact your Yealink reseller for further support.
Topics
IP Address Issues
Time and Date Issues
Display Issues
Phone Book Issues
Audio Issues
Wi-Fi and Bluetooth Issues
Firmware and Upgrading Issues
System Log Issues
Password Issues
Logo Issues
Power and Startup Issues
Other Issues
IP Address Issues
The device does not get an IP address
Do one of the following:
If your device connects to the wired network:
l Ensure that the Ethernet cable is plugged into the Internet port on the IP phone and the Ethernet cable is not
loose.
l Ensure that the Ethernet cable is not damaged.
l Ensure that the IP address and related network parameters are set correctly.
l Ensure that your network switch or hub is operational.
l Ensure that the Wi-Fi feature is disabled.
If your phone connects to the wireless network:
l If the network is secure, ensure the entered password is correct.
l Ensure your gateway/router enables the wireless network feature.
Solving the IP conflict problem
Do one of the following:
l Reset another available IP address for the IP phone.
l
Check network configuration via the phone user interface at the path Menu > Advanced (default password:
admin) > Network > WAN Port > IPv4 (or IPv6). For black-and-white phones, navigate to Menu > Settings >
Advanced Settings (default password: admin) > Network > WAN Port > IPv4 (or IPv6). If the Static IP is selec-
ted, select DHCP instead.
The Specific format in configuring IPv6 on Yealink phones
Scenario 1:
If the IP phone obtains the IPv6 address, the format of the URL to access the web user interface is “[IPv6 address]”
or “http(s)://[IPv6 address]”. For example, if the IPv6 address of your phone is “fe80::204:13ff:fe30:10e”, you can
enter the URL (for example, “[fe80::204:13ff:fe30:10e]” or “http(s)://[fe80::204:13ff:fe30:10e])” in the address bar of a
web browser on your PC to access the web user interface.

Yealink SIP-T41S Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Keypad illumination	Yes
Wi-Fi	No
Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Supported network protocols	SIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Volume control	Digital
Number of programmable keys	6
Lines quantity	6 lines
Phonebook capacity	1000 entries
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Input frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
AC adapter output current	1.2 A
AC adapter output voltage	5 V
Display diagonal	2.7 \
Display resolution	192 x 64 pixels
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Voice codecs	CNG, G.711Mu, G.711a, G.723.1, G.726, G.729ab, VAD, iLBC
Certification	CE
Cables included	LAN (RJ-45)
Number of handles included	1 pc(s)
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	189 mm
Width	212 mm
Height	175 mm
Package depth	223 mm
Package width	246 mm
Package height	120 mm