EasyManuals Logo
Home>Yealink>IP Phone>SIP-T41S

Yealink SIP-T41S Administrator's Guide

Yealink SIP-T41S
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #382 background imageLoading...
Page #382 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
379
When the phone receives an incoming call in the call state, the screen does not prompt the incoming call inform-
ation. You can perform other features on the current call. You can only answer the incoming call after ending the cur-
rent call.
Topic
Ignoring Incoming Calls Configuration
Ignoring Incoming Calls Configuration
The following table lists the parameter you can use to configure ignoring incoming calls.
Parameter
features.ignore_incoming_call.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to ignore the incoming call.
Permitted
Values
0-Disabled
1-Enabled, the incoming call is still in the progress and is not rejected, the user can choose to answer
it or not, or perform other features.
Default
0
Off Hook Answering
You can set whether to answer an incoming call by picking up the handset, pressing the Speakerphone key or
pressing the HEADSET key directly.
It is not applicable to CP920 phones.
Topic
Off Hook Answering Configuration
Off Hook Answering Configuration
The following table lists the parameter you can use to configure off hook answering.
Parameter
features.off_hook_answer.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to answer an incoming call by picking up the handset, pressing the
Speakerphone key or pressing the HEADSET key directly.
Permitted
Values
0-Disabled, the user needs to press the corresponding line key, the Answer soft key or the OK key to
answer an incoming call after picking up the handset, pressing the Speakerphone key or pressing the
HEADSET key.
1-Enabled

Table of Contents

Other manuals for Yealink SIP-T41S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T41S and is the answer not in the manual?

Yealink SIP-T41S Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Keypad illuminationYes
Wi-FiNo
Networking standardsIEEE 802.3af
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Supported network protocolsSIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Volume controlDigital
Number of programmable keys6
Lines quantity6 lines
Phonebook capacity1000 entries
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Input frequency50/60 Hz
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Display diagonal2.7 \
Display resolution192 x 64 pixels
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Voice codecsCNG, G.711Mu, G.711a, G.723.1, G.726, G.729ab, VAD, iLBC
CertificationCE
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth189 mm
Width212 mm
Height175 mm
Package depth223 mm
Package width246 mm
Package height120 mm

Related product manuals