EasyManuals Logo
Home>Yealink>IP Phone>SIP-T41S

Yealink SIP-T41S Administrator's Guide

Yealink SIP-T41S
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #378 background imageLoading...
Page #378 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
375
Password Dial
Password dial feature allows the callee number to be partly displayed on the IP phone when placing a call. The hid-
den digits are displayed as asterisks on the phone screen. The number in the placed call list is also partly displayed
on the IP phone. This feature is especially useful for users who often place important and confidential calls.
Topic
Password Dial Configuration
Password Dial Configuration
The following table lists the parameters you can use to configure password dial.
Parameter
features.password_dial.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to partly display the callee number when placing a call.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Web UI
Features > General Information > PswDial
Parameter
features.password_dial.prefix <y0000000000xx>.cfg
Description
It configures the prefix that the number starts with this prefix will be partially displayed.
Example:
features.password_dial.prefix = 12
Note: It works only if “features.password_dial.enable is set to 1 (Enabled).
Permitted
Values
String within 32 characters
Default
Blank
Web UI
Features > General Information > PswPrefix
Parameter
features.password_dial.length <y0000000000xx>.cfg
Description
It configures how many digits to be displayed as asterisks.
Example:
features.password_dial.length = 3
If you set the prefix to 12 and the length to 3, when you want to dial the number 123456, the entered
number is displayed as 12***6 on the phone screen.
Note: It works only if “features.password_dial.enable is set to 1 (Enabled).
Permitted
Values
Integer from 0 to 32
Default
Blank
Web UI
Features > General Information > PswLength
Call Timeout
Call timeout defines a specific period of time after which the phone will cancel the dialing if the call is not answered.
Topic

Table of Contents

Other manuals for Yealink SIP-T41S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T41S and is the answer not in the manual?

Yealink SIP-T41S Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Keypad illuminationYes
Wi-FiNo
Networking standardsIEEE 802.3af
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Supported network protocolsSIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Volume controlDigital
Number of programmable keys6
Lines quantity6 lines
Phonebook capacity1000 entries
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Input frequency50/60 Hz
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Display diagonal2.7 \
Display resolution192 x 64 pixels
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Voice codecsCNG, G.711Mu, G.711a, G.723.1, G.726, G.729ab, VAD, iLBC
CertificationCE
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth189 mm
Width212 mm
Height175 mm
Package depth223 mm
Package width246 mm
Package height120 mm

Related product manuals