EasyManuals Logo
Home>Yealink>IP Phone>SIP-T41S

Yealink SIP-T41S Administrator's Guide

Yealink SIP-T41S
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #557 background imageLoading...
Page #557 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
554
Scenario 2:
Yealink phones support using FTP, TFTP, HTTP, and HTTPS protocols to download configuration files or resource
files. You can use one of these protocols for provisioning.
When provisioning your IP phone obtaining an IPv6 address, the provisioning server should support IPv6 and the
format of the access URL of the provisioning server can be “tftp://[IPv6 address or domain name]”. For example, if
the provisioning server address is “2001:250:1801::1”, the access URL of the provisioning server can be “tftp://
[2001:250:1801::1]/”. For more information on provisioning, refer to Yealink SIP IP Phones Auto Provisioning Guide.
Time and Date Issues
Display time and date incorrectly
Check if the IP phone is configured to obtain the time and date from the NTP server automatically. If your phone is
unable to access the NTP server, configure the time and date manually.
Display Issues
The phone screen is blank
Do one of the following:
l Ensure that the IP phone is properly plugged into a functional AC outlet.
l Ensure that the IP phone is plugged into a socket controlled by a switch that is on.
l If the IP phone is plugged into a power strip, try plugging it directly into a wall outlet.
l If your phone is PoE powered, ensure that you are using a PoE-compliant switch or hub.
The phone displays No Service”
The LCD screen prompts “No Service message when there is no available SIP account on the IP phone.
Do one of the following:
l
Ensure that an account is actively registered on the phone at the path Menu > Status > More > Accounts.
l Ensure that the SIP account parameters have been configured correctly.
Phone Book Issues
Difference between a remote phone book and a local phone book
A remote phone book is placed on a server, while a local phone book is placed on the IP phone flash. A remote
phone book can be used by everyone that can access the server, while a local phone book can only be used on a
specific phone. A remote phone book is always used as a central phone book for a company; each employee can
load it to obtain real-time data from the same server.
Audio Issues
Increasing or decreasing the volume
Press the volume key to increase or decrease the ringer volume when the IP phone is idle or ringing, or to adjust
the volume of the engaged audio device (handset, speakerphone or headset) when there is an active call in pro-
gress.
Get poor sound quality during a call
If you have poor sound quality/acoustics like intermittent voice, low volume, echo or other noises, the possible reas-
ons could be:

Table of Contents

Other manuals for Yealink SIP-T41S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T41S and is the answer not in the manual?

Yealink SIP-T41S Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Keypad illuminationYes
Wi-FiNo
Networking standardsIEEE 802.3af
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Supported network protocolsSIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Volume controlDigital
Number of programmable keys6
Lines quantity6 lines
Phonebook capacity1000 entries
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Input frequency50/60 Hz
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Display diagonal2.7 \
Display resolution192 x 64 pixels
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Voice codecsCNG, G.711Mu, G.711a, G.723.1, G.726, G.729ab, VAD, iLBC
CertificationCE
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth189 mm
Width212 mm
Height175 mm
Package depth223 mm
Package width246 mm
Package height120 mm

Related product manuals