EasyManuals Logo
Home>Yealink>IP Phone>SIP-T41S

Yealink SIP-T41S Administrator's Guide

Yealink SIP-T41S
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #512 background imageLoading...
Page #512 background image
Configuration Parameters
509
word of the SIP account for XSI authentication.
Default
0
Web UI
Applications > Broadsoft XSI > XSI Account > Allow SIP Authentication for XSI
Parameter
default_input_method.xsi_password <y0000000000xx>.cfg
Description
It configures the default input method when the XSI authentication is failed and the user re-enters the
password.
Permitted
Values
123, abc, ABC or 2aB
Default
2aB
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T43U/T42G/T42U/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T40P/T40G/T23P/T23G, X=1-3; for T21
(P) E2, X=1-2; for T19(P) E2/CP920, X=1.
[2]
If you change this parameter, the phone will reboot to make the change take effect.
Broadsoft ACD
Parameter
account.X.acd.initial_state
[1]
<MAC>.cfg
Description
It configures the initial status after logging in to ACD.
Permitted
Values
1-Available
2-Unavailable
Default
1
Parameter
account.X.reason_code.Y
[1][2]
<MAC>.cfg
Description
It configures the unavailable code which must match one of the codes configured on the BroadWorks
platform.
Permitted
Values
Integer from 1 to 2147483647
Default
Blank
Parameter
account.X.reason_code_name.Y
[1][2]
<MAC>.cfg
Description
It configures the unavailable reason which must match one of the reasons configured on the
BroadWorks platform.
Permitted
Values
String within 99 characters
Default
Blank
Parameter
account.X.supervisor_info_code.Y
[1][2]
<MAC>.cfg
Description
It configures the supervisor number.
Permitted
Values
Integer from 1 to 2147483647
Default
Blank
Parameter
account.X.supervisor_info_code_name.Y
[1][2]
<MAC>.cfg
Description
It configures the supervisor name.
Permitted
String within 99 characters

Table of Contents

Other manuals for Yealink SIP-T41S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T41S and is the answer not in the manual?

Yealink SIP-T41S Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Keypad illuminationYes
Wi-FiNo
Networking standardsIEEE 802.3af
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Supported network protocolsSIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Volume controlDigital
Number of programmable keys6
Lines quantity6 lines
Phonebook capacity1000 entries
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Input frequency50/60 Hz
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Display diagonal2.7 \
Display resolution192 x 64 pixels
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Voice codecsCNG, G.711Mu, G.711a, G.723.1, G.726, G.729ab, VAD, iLBC
CertificationCE
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth189 mm
Width212 mm
Height175 mm
Package depth223 mm
Package width246 mm
Package height120 mm

Related product manuals