Yealink SIP-T41S Administrator's Guide

Configuration Parameters
533
Description
It configures how the phone behaves when pressing the OK key during the call.
Permitted
Values
0-Do not response
1-The phone sends a SIP INFO request that contains the event flashhook message body to the
remote party.
2-Enter the Status screen, you can check the firmware version, phone's IP address and so on for
troubleshooting.
3-Unhold the call
4-Enter the Menu screen, you are allowed to configure Call Forward, Call Waiting, Auto Answer, Key
As Send, Hotline, Auto Redial, DND, Intercom, Call Completion, History Setting, Paging List features.
Default
0
Supported
Devices
All phones except T57W, T48G, T46G, T42G, T41P and T29G
Unify Parameters
Parameter
unify.enable <y0000000000xx>.cfg
Description
It enables or disables the Unify features.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Supported
Devices
T57W, T54W, T53W, T53, T48U, T46U, T43U, T42U, T48S, T46S, T42S, T41S, T27G and CP920
Case Scen-
ario
Identify the Notify messages sent by the Unify server and synchronize the FWD / DND feature with
server.

Yealink SIP-T41S Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Keypad illumination	Yes
Wi-Fi	No
Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Supported network protocols	SIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Volume control	Digital
Number of programmable keys	6
Lines quantity	6 lines
Phonebook capacity	1000 entries
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Input frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
AC adapter output current	1.2 A
AC adapter output voltage	5 V
Display diagonal	2.7 \
Display resolution	192 x 64 pixels
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Voice codecs	CNG, G.711Mu, G.711a, G.723.1, G.726, G.729ab, VAD, iLBC
Certification	CE
Cables included	LAN (RJ-45)
Number of handles included	1 pc(s)
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	189 mm
Width	212 mm
Height	175 mm
Package depth	223 mm
Package width	246 mm
Package height	120 mm