Yealink SIP-T48G User Manual

User Guide for the SIP-T48G IP Phone
136
- With the optional headset connected, press to activate the headset mode.
Enter the desired number.
Press , , or tap Send.
Note
The SIP-T48G IP phone can handle multiple calls at a time. However, only one active call (the call
that has audio associated with it) can be in progress at any time. The SIP-T48G IP phone can
handle a maximum of 50 calls at one time.
To place multiple calls:
You can have more than one call on your SIP-T48G IP phone. To place a new call during an
active call, do one of the following:
- Tap the line key. The active call is placed on hold.
Enter the desired number.
Press , , or tap Send.
- Press or tap the Hold soft key to place the original call on hold.
Tap the New Call soft key.
Enter the desired number.
Press , , or tap Send.
You can tap the desired call, and then tap the Resume soft key to retrieve it.
Note
Answering Calls
When you are not in another call, you can answer a call in one of three ways:
 Using the handset
 Using the speakerphone
 Using the headset
Note
You can reject incoming calls by pressing the X key or tapping the Reject soft key to stop the
phone from playing ring tone. You can also activate the Do Not Disturb mode to reject the
incoming calls without ringing on your phone. For more information, refer to Do Not Disturb
(DND) on page 148.
You can forward incoming calls to someone else by tapping the Forward soft key. For more
information, refer to Call Forward on page 153.
To permanently use the headset mode, refer to Headset Use on page 98.
If multiple accounts are registered on the phone, you can first tap the desired line key on the idle
screen or tap the desired line from the status bar on the dialing screen, and then you can use the
selected account to place a call.

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm