Yealink SIP-T48G User Manual

Basic Call Features
163
Call Transfer
You can transfer a call to another party during a call in one of three ways:
 Blind Transfer: Transfer a call directly to another party without consulting.
 Semi-Attended Transfer: Transfer a call when the target phone is ringing.
 Attended Transfer (Consultative Transfer): Transfer a call with prior consulting.
Blind Transfer
Before performing a blind transfer (except you use dial number method), make sure that the
transfer mode on DSS key is configured as Blind Transfer. For more information on how to
configure it, refer to Configuring Transfer Mode on DSS Key on page 188.
To perform a blind transfer during a call:
1. Press or tap the Transfer soft key during a call.
2. You can do one of the following:
- Enter the number you want to transfer the call to.
Press or tap Transfer to complete the transfer.
If you are using a handset, the transfer can be completed by hanging up the handset.
- Tap the Directory soft key, and then tap All Contacts. Search for the contact and tap
the desired contact to complete the transfer.
- Tap the Directory soft key, and then tap Remote Phone Book. Search for the contact
and tap the desired contact to complete the transfer. (Remote phone book should be
configured in advance. Refer to Remote Phone Book on page 90 for more
information.).
- Tap the History soft key, and then tap the desired list. Search for the contact and tap
the desired contact to complete the transfer.

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm