Yealink SIP-T48G User Manual

User Guide for the SIP-T48G IP Phone
34
wireless network again.
Deactivating the Wi-Fi Mode
To deactivate the Wi-Fi mode via phone user interface:
1. Tap ->Basic->Wi-Fi.
2. Tap the Off radio box of the Wi-Fi field.
The Wi-Fi icon disappears from the touch screen.
Registration
Generally, your phone will be deployed with multiple other phones. In this case, your system
administrator will configure the phone parameters beforehand, so that after you start up your
phone, the phone will be registered and ready for use. The SIP-T48G IP phone supports up to 16
accounts. If your phone is not registered, you may have to register it. For more information on
how to register your phone, refer to Account Management on page 120.

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm