Yealink SIP-T48G User Manual

Basic Call Features
171
4. Tap the gray box of the Account ID field, and then select the desired line from the
pull-down list.
5. (Optional.) Enter the string that will appear on the LCD screen in the Label field.
6. Enter the park retrieve code in the Value field.
7. Tap the Save soft key to accept the change or the to cancel.
If the park retrieve code is already configured for the Retrieve key, you don’t need to configure
it when configuring a retrieve park key.
Call park key and retrieve park key are configurable via web user interface at the path
Dsskey->Line Key.
Note
FAC Mode
To configure call park feature in FAC mode via web user interface:
1. Click on Features->Call Pickup.
2. Select FAC from the pull-down list of Call Park Mode.
3. Select Enabled from the pull-down list of Call Park.
If Enabled is selected, the Park soft key will display on the LCD screen during a call, and the
Retrieve soft key will display on the dialing screen.
4. (Optional.) Enter the call park code in the Call Park Code field.
It is configured for the Park soft key. This call park code will also apply to the call park key.
5. (Optional.) Enter the park retrieve code in the Park Retrieve Code field
The call park code and park retrieve code are predefined on the system server. Contact your
system administrator for more information.

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm