Yealink SIP-T48G User Manual

User Guide for the SIP-T48G IP Phone
162
To deactivate call forward in phone mode:
Do one of the following:
- Press when the phone is idle.
- Tap ->Features->Call Forward.
Tap the desired forwarding type.
Tap the Off radio box.
Tap the Save soft key to accept the change.
To deactivate call forward in custom mode:
1. Tap ->Features->Call Forward or press when the phone is idle.
The touch screen displays a list of accounts registered on the phone.
2. Tap the desired account.
3. Tap he desired forwarding type.
4. Tap the Off radio box.
If you want to deactivate call forward for all accounts, tap the All Lines soft key.
5. Tap the Save soft key to accept the change.
Dynamic Forwarding
You can manually forward a call to another number while your phone rings.
To forward an incoming call to another party:
1. When the phone is ringing, tap the Forward soft key.
2. Enter the number you want to forward the incoming call to.
3. Press , , or tap Forward.
The touch screen prompts a call forward message.

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm