Yealink SIP-T48G User Manual

Advanced Phone Features
243
Voice Mail
You can leave voice mails for someone else using the SIP-T48G IP phone. You can also listen to
the voice mails that are stored in a voice mailbox. This feature is set up on the server side. It is
not available on all servers.
When receiving a new voice mail, the phone will play a warning tone. The power indicator LED
will slowly flash red, and the touch screen will prompt “n New Voice Mail(s)” (“n” indicates the
number of unread voice messages, e.g., 19 New Voice Mail(s)) and an icon .
If the voice mail pop-up message box disappears, it won't pop up again unless the user receives
a new voice mail or the user re-registers the account that has unread voice mail(s).
Note
To leave a voice mail:
You can leave a voice mail for someone else when he/she is busy or inconvenient to answer the
call. Follow the voice prompt from the system server to leave a voice mail, and then hang up.
To configure voice mail access codes via phone user interface:
1. Tap ->Message->Voice Mail->Set Voice Mail Code.
2. Enter the voice mail access code (e.g., *4) in the desired account field.
You can configure the phone not to display the pop-up prompt, contact your system
administrator for more information.
The icon on the status bar has a counter indicating the number of messages you haven’t
heard yet.

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm