Yealink SIP-T48G User Manual

Basic Call Features
153
When DND is activated on the phone, the phone can still receive incoming calls from the
numbers specified in the DND Authorized Numbers field.
Note
To deactivate DND in phone mode:
1. Tap the DND soft key when the phone is idle.
To deactivate DND in custom mode:
1. Tap the DND soft key when the phone is idle.
2. Tap the desired account.
3. Tap the Off radio box of the DND Status field.
4. Tap the Save soft key to accept the change.
Call Forward
You can configure your phone to forward incoming calls to another party (static forwarding).
You can also forward calls while your phone is ringing (dynamic forwarding).
Note
Static Forwarding
Three types of static forwarding are:
 Always Forward: Incoming calls are immediately forwarded.
 Busy Forward: Incoming calls are immediately forwarded if the phone is busy.
 No Answer Forward: Incoming calls are forwarded if not answered after a period of time.
You can activate/deactivate call forward for the phone system, or you can customize call forward
for each or all accounts.
There are two call forward modes:
 Phone (default): Call forward is effective for the phone system.
 Custom: Call forward can be configured for each or all accounts.
DND authorized number is configurable via web user interface only.
When the phone misses a call, a prompt window will pop up by default. If you want to disable the
feature, contact your system administrator for more information.
When the phone forwards a call, a prompt window will pop up by default. If you want to disable
the feature, contact your system administrator for more information.
You cannot activate or deactivate call forward when call forward feature is disabled. Contact your
system administrator for more information.

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm