Yealink SIP-T48G User Manual

User Guide for the SIP-T48G IP Phone
190
DPickup soft key. Before picking up an incoming call, ensure that the directed call pickup code
has been configured in advance.
To pick up an incoming call using the BLF key or the DPickup soft key:
1. Tap the BLF key or the DPickup soft key.
The incoming call of the monitored user is answered on the IP phone.
Note
Parking a Call/Retrieving a Parked Call to the Monitored User
You can press the desired BLF key to park a call or retrieve a parked call directly in FAC mode. It
should be pre-configured by your system administrator.
To park a call in FAC mode:
1. During a call, tap the Park soft key (You may need to tap the More soft key to see the Park
soft key).
2. Tap to back to the idle screen, and then tap the desired BLF key to park the call to the
monitored user.
To retrieve a parked call in FAC mode:
1. Tap the Retrieve soft key on the dialing screen.
2. Tap to back to the idle screen, and then tap the desired BLF key to retrieve a call that
is parked to the monitored user.
Note
BLF List
You can use the BLF List feature to monitor a list of users defined by your system administrator.
For example, your system administrator enables BLF List, and creates a BLF List URI (e.g.,
BLFList@example.com) including a list of user1, user2 on the server. The BLF List keys on the IP
phone can present the status of user1 and user2. The key icons illuminate flashing or solid
depending on the status of those users. For more BLF List key icon indicators, refer to LED
Instructions on page 9.
You can use the BLF List keys in the following ways:
 When the monitored user is idle, tap the BLF list key to dial out the phone number.
 When there is already an active call on the IP phone, you can transfer the active call to the
If the directed call pickup code is not configured, the phone will place a call to the monitored
user instead of picking up an incoming call of the monitored user when you tap the BLF key or
the DPickup soft key.
Make sure that the call park code/park retrieve code is configured via web user interface at the
path: Feature->Call Pickup. For more information, refer to FAC Mode on page 171.

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm