Yealink SIP-T48G User Manual

User Guide for the SIP-T48G IP Phone
48
The IP phone will automatically set the custom pictures you upload as the screen saver,
and display these pictures alternately.
5. Tap the Save soft key to accept the change or to cancel.
Screen saver is configurable via web user interface at the path Settings->Preference.
Power Saving
The power saving feature is used to turn off the backlight and screen to conserve energy. The IP
phone enters power-saving mode after it has been idle for a certain period of time.
The IP phone will exit power-saving mode if one of the following phone events occurs:
 Press any key.
 Tap the touch screen.
 Pick up/hang up the handset.
 There is an incoming call.
 A new prompt (e.g., missed call, new voice mail or forwarded call).
 The status of BLF key changes.
If the screen saver is enabled on your phone, power-saving mode will still occur.
You can configure the following power-saving settings:
 Office Hour
 Idle Timeout (minutes)
The office hour and idle timeout (minutes) settings work only if the power saving feature is
enabled.
Note
Power saving is configurable via web user interface only.

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm