Yealink SIP-T48G User Manual

User Guide for the SIP-T48G IP Phone
166
If on code or off code is configured, the IP phone will send the corresponding code to
activate or deactivate call waiting on the server. It is not available on all servers.
5. Tap the Save soft key to accept the change or to cancel
Call waiting is configurable via web user interface at the path Features->General Information.
Note
Conference
You can use the SIP-T48G IP phone to create a conference with other two parties using the
phone’s local conference or create a conference with multiple participants which is called
network conference.
Note
Local Conference
The SIP-T48G IP phone supports up to 3 parties (including yourself) in a conference call. This is
the default method of conference called Local Conference. You can create a conference
between an active call and a call on hold at any time by tapping the Conference soft key.
Note
To set up a local conference call:
1. Place a call to the first party.
Network conference is not available on all servers. For more information, contact your system
administrator.
To set up a local conference call, make sure local conference feature is enabled. For more
information, contact your system administrator.
If on code or off code is not configured, the call waiting may not take effect. It depends on your
server. Contact your server administrator for more information.

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm