Yealink SIP-T48G User Manual

User Guide for the SIP-T48G IP Phone
226
4. Click Confirm to accept the change.
The phone will dial out “*11” automatically when you tap the Call Pull soft key.
Using SCA Feature on the IP Phone
This section provides you with detailed information on using the SIP-T48G IP phone in a SCA
Hybrid Key System scenario. In a SCA Hybrid Key System scenario, the status of the line key icon
which associates with a shared line will change. For more information on line key icon indicators,
refer to Line Key Icons on page 4.
You can do the following using the IP phone in a SCA Hybrid Key System scenario:
 Placing calls
 Answering calls
 Placing a call on hold
 Retrieving a held call
 Barging in an active call
 Call Pull
Placing Calls
You can have one call or multiple calls on the shared line.
To place a call on the shared line:
Do one of following:
- Enter the desired number using the keypad when the phone is idle. Press , , or
tap Send.
The phone will dial the entered number using the first line key.
- Tap the line key when the phone is idle to enter the dialing screen.
Enter the desired number using the keypad and then press , , or tap Send.
The phone will dial the entered number using the selected line key.
To place multiple calls on the shared line:
You can have more than one call on the shared line. To place a new call when there is an active
call on the line key 1 of phone A, do one of the following on phone A:
- Press or tap the Hold soft key. The original call is placed on hold.
Tap the New Call soft key to enter the dialing screen.
Enter the desired number using the keypad.
Press , , or tap Send.
Phone A will dial the entered number using the line key 2 automatically.

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm