Yealink SIP-T48G User Manual

User Guide for the SIP-T48G IP Phone
178
To pick up a call directly:
1. Pick up the handset, tap the line key or press the Speakerphone key.
The DPickup appears on the on-screen keypad.
2. Tap DPickup on your phone when the target phone receives an incoming call.
3. Enter the phone number which is receiving an incoming call.
4. Tap DPickup again.
The call is answered on your phone.
You can also configure a DSS key as a direct pickup key via phone user interface or web user
interface. Once configured, you can pick up a call by tapping the direct pickup key directly. For
more information, refer to DSS Keys on page 108.
Group Call Pickup
To enable group call pickup and configure the group call pickup code on a global basis via
web user interface:
1. Click on Features->Call Pickup.
2. Select Enabled from the pull-down list of Group Call Pickup.

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm