Yealink SIP-T48G User Manual

User Guide for the SIP-T48G IP Phone
144
When the called party becomes idle, the following prompt will appear on the touch screen of
the phone:
1. Tap OK to redial the number.
Note
Recall
You can tap a recall key to place a call back to the last incoming call.
To configure a recall key via phone user interface:
1. Tap ->Features->DSS Keys.
2. Tap the desired line key.
3. Tap the gray box of the Type field, and then select Key Event from the pull-down list.
4. Tap the gray box of the Key Type field, and then select ReCall from the pull-down list.
5. (Optional.) Enter the string that will appear on the touch screen in the Label field.
Call completion is not available on all servers. For more information, contact your system
administrator.

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm