Customizing Your Phone
121
To configure incoming/outgoing call lookup and update time interval via web user
interface:
1. Click on Directory->Remote Phone Book.
2. Select Enabled from the pull-down list of Incoming/Outgoing Call Lookup.
3. Enter the desired refresh period in the Update Time Interval(Seconds) field.
The default value is 21600.
4. Click Confirm to accept the change.
Mobile Contacts
The first time your IP phone pairs and connects to your Bluetooth-enabled mobile phone, you
will be asked if you would like to sync phone contacts temporarily. If allowed, the phone
contacts will be imported to the mobile contacts directory of your IP phone. For more
information, refer to Bluetooth-Enabled Mobile Phone on page 141.
You can add a contact to the local directory or blacklist directory from mobile contacts. You
cannot add a contact to the mobile contacts directory on your IP phone.
Note
For operating instructions on placing calls to and/or searching for contacts in the mobile
contacts directory, refer to the operating instructions of Placing Calls to Contacts on page 113
and/or Searching for Contacts on page 114.
To add a contact to the local directory from mobile contacts directory:
1. Tap ->Mobile Contacts.
2. Drag up and down to view the list of Mobile Contacts.
If you disconnect the Bluetooth-enabled mobile phone from IP phone or disable the IP phone to
sync phone contacts, the mobile contacts directory will disappear.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
