Getting Started
53
• Drag / to select all characters.
1) Long tap the entered character(s).
2) Drag / to select the characters you want to
cut/copy.
3) Tap CUT/COPY on the top of the touch screen.
4) Long tap the desired field.
5) Tap PASTE.
Delete more characters at a
time.
• Long tap the entered character(s).
Drag / to select the characters you want to delete.
Tap .
• Long tap .
1) Drag your finger to highlight the characters you want to
replace.
2) Tap the desired character.
Using the Phone Keypad and Onscreen Dial Pad
Instead of using the onscreen keyboard, you can also use the keypad on your phone or dial pad
on the dialing screen to enter data. The phone keypad and onscreen dial pad only provide digit
keys, # key and * key.
Note
Phone Status
You can view phone status via phone user interface or web user interface.
Available information of phone status includes:
General information (IP address, MAC address and firmware version)
Network status (IPv4 status or IPv6 status, IP mode and MAC address)
- IPv4 uses a 32-bit address.
- IPv6 is an updated version of the current Internet Protocol to meet the increased
demands for unique IP addresses, using a 128-bit address.
Phone status (product name, hardware version, firmware version, product ID, MAC address,
device certificate status and Android version)
Account status (register status of SIP accounts)
Storage information (internal storage, internal SD and USB storage)
When using the onscreen dial pad, you can tap to use the onscreen keyboard. For more
information, refer to Using the Onscreen Keyboard on page 49.