User Guide for SIP-T58V/A Smart Media Phone
22
LED Instructions
Power Indicator LED
The phone is initializing.
The phone receives a video/voice mail.
The phone is powered off.
The phone is idle.
The phone is busy.
The call is placed on hold or is held.
The call is muted.
Note
Camera Indicator LED
The phone is powered on and the camera is properly
connected to the phone.
The camera is idle.
The phone receives an audio-only call.
The phone receives a video call.
There is an active video call.
The video call is muted.
The video call is held.
The shutter switch is open, but the near-site video is
stopped transmitting during a video call.
The video call is placed on hold.
The phone is powered off.
The camera is not properly connected to the phone.
The shutter switch is closed.
The above introduces the default power indicator LED status. The status of the power indicator
LED is configurable via web user interface. For more information, refer to
Yealink_SIP-T5_Series_Smart_Media_Phones_Administrator_Guide.