User Guide for SIP-T58V/A Smart Media Phone
310
You can pick up an incoming call by tapping DPickup/GPickup on the dialing screen. To use
call pickup, you need to configure the call pickup code beforehand on a global or per-line basis
via web user interface. The call pickup code configured on a per-line basis takes precedence
over that configured on a global basis.
Note
Directed Call Pickup
To enable directed call pickup and configure the directed call pickup code on a global
basis via web user interface:
1. Click on Features->Call Pickup.
2. Select Enabled from the pull-down list of Directed Call Pickup.
3. Enter the directed call pickup code in the Directed Call Pickup Code field.
4. Click Confirm to accept the change.
To configure the directed call pickup code on a per-line basis via web user interface:
1. Click on Account->Advanced.
2. Select the desired account from the pull-down list of Account.
If there are many incoming calls at the same time, tapping GPickup on the phone will pick up the
call that rings first.