YOKOGAWA Daqstation DX2000 User Manual

1-58
IM 04L42B01-01E
USBInterface(/USB1option)
You can connect keyboards, barcode readers , or USB flash memory to two USB ports,
one on the front and one on the back of the DX.
• You can operate the DX using a keyboard or barcode reader.
• YoucansavemeasureddataandsetupdatatotheUSBflashmemoryandalsoload
from it.
For the operating procedure, see sections 2.11 and 2.12.
ExternalInputChannels(/MC1option)
These channels handle measured data of other devices that is read with the
communication function. There are 240 channels available. As with measurement
channels, the data of these channels can be displayed and saved.
For the setting procedure, see sections 10.1 and 10.2.
TemperatureUnit
You can set the unit when measuring temperature with the thermocouple or RTD to °C or
°F.
For the setting procedure, see section 3.3.
CustomDisplay(Releasenumbers3andlater)
You can create a custom operation screen.
See the Custom Display User’s Manual, IM04L41B01-04E.
MultiBatchFunction(/BT2option;releasenumbers3andlater)
You can use this function to simultaneously record the measured data from multiple
batches.
See the Multi Batch (/BT2) User’s Manual, IM04L41B01-03E.
AdvancedSecurityFunction(/AS1option;releasenumbers4andlater)
The advanced security option strengthens measurement security with login, audit trail,
digital signature, and other functions.
See the Advanced Security Function (/AS1) User’s Manual, IM 04L41B01-05EN.
1.10OtherFunctions

YOKOGAWA Daqstation DX2000 Specifications

General

Brand	YOKOGAWA
Model	Daqstation DX2000
Category	Recording Equipment
Language	English