EasyManuals Logo
Home>YOKOGAWA>Recording Equipment>Daqstation DX2000

YOKOGAWA Daqstation DX2000 User Manual

YOKOGAWA Daqstation DX2000
366 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #86 background imageLoading...
Page #86 background image
2-16
IM 04L42B01-01E
ControllingtheDX
Control the DX by pointing the infrared output section of the remote control terminal to
the light-receiving section on the DX. Control the DX while checking the results on the
DX screen.
Note
• TheremotecontrolterminalcannotbeusedtocontroltheFavoritekey.
• WhenaspecifickeyoperationispossibleontheDX,thecorrespondingkeyontheremote
control terminal is activated. For example, the operation for entering a character string is
activated when a window for entering a character string is displayed on the DX screen.
• YoucannotcontroltheDXusingtheremotecontrolterminal,iftheremotecontrolterminalis
in the ID number setup mode.
• CorrespondencewiththeDXKeys
Right arrow key
ESC key
Left arrow key
FUNC key
DISP/ENTER key
MENU key
Soft keys
User key
Up arrow key
START key
Down arrow key
Character input
keys
Character input
keys
Hold down SHIFT
and press F3/F7.
Hold down SHIFT
and press F2/F6.
Hold down SHIFT
and press F1/F5.
STOP key
Character type switch key for character input keys (see the next page)
Delete key
Deletes the character at the cursor position when inputting characters.
Space key
Enters a space at the cursor position when inputting characters.
• EnteringStrings
When a character input window is displayed on the DX screen, pressing the A/a/1
key switches the character type assigned to the character input keys as shown in the
following figure.
Uppercase alphabet
characters and symbols
Lowercase alphabet
characters and symbols
Numbers
• UppercaseAlphabetCharactersandSymbols/LowercaseAlphabet
CharactersandSymbols
Alphabet (A to Z or a to z)
1 2 3 4 5 6 7 8 9 10
Number of times
the key is pressed
Symbol % # @ ( )
Each time the MARK key is pressed, the displayed symbol switches
in the following order.
The display switches in a cyclic pattern.
°
_
11 12 13
: [ ] + * /
2.10ControllingtheDXwiththeRemoteControlTerminal(/KB1and/KB2Options)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the YOKOGAWA Daqstation DX2000 and is the answer not in the manual?

YOKOGAWA Daqstation DX2000 Specifications

General IconGeneral
BrandYOKOGAWA
ModelDaqstation DX2000
CategoryRecording Equipment
LanguageEnglish

Related product manuals