Maintenance & Troubleshooting 11 - 11
Four Slot Battery Charger
r
Cables
Table 11-5
Troubleshooting The Four Slot Battery Charger
Symptom Possible Cause Action
Battery not charging. Battery was
removed from the
charger or charger
was unplugged from
AC power too soon.
Re-insert the battery in the charger or re-connect the charger’s
power supply. The 3600 mAh battery fully charges in less than
six hours.
Battery is faulty. Verify that other batteries charge properly. If so, replace the
faulty battery.
Battery contacts not
connected to
charger.
Verify that the battery is seated in the battery well correctly with
the contacts facing down.
Table 11-6
Troubleshooting the Cables
Symptom Possible Cause Action
MC67 battery is not
charging.
MC67 was
disconnected from
AC power too soon.
Connect the power cable correctly. Confirm main battery is
charging. Tap >
Power
>
Settings
>
Battery
tab. The 3600
mAh battery fully charges in less than six hours.
Battery is faulty. Verify that other batteries charge properly. If so, replace the
faulty battery.
The MC67 is not
fully attached to
power.
Detach and re-attach the power cable to the MC67, ensuring it
is firmly connected.
During data
communication, no
data transmits, or
transmitted data was
incomplete.
Cable was
disconnected from
MC67 during
communications.
Re-attach the cable and retransmit.
Incorrect cable
configuration.
See the system administrator.
Communication
software is not
installed or
configured properly.
Perform setup as described in the MC67 Integrator Guide.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
