Front PTO oil
Plastic lubricant for the tractor
Liquid for the cooling system of the tractors
Coolant and demineralized water in the ratio of 1:1.5 (carry out refilling of the mixture using this ratio).
While changing or refilling the cooling fill in the engine always use a coolant complying with the prescribed
specifications.
Do not use water without an antifreeze for the cooling of a tractor!
Carry out a renewal of the coolant after two years of operation.
Fuel
Diesel oil complying with the regulation of EN 590
Paraffin impurities or additional additives in fuel are not allowed for engines with Common-
Rail in
ection
Manufacturer Oil designation
Shell Donax TX
BP Autran DX III
Fluid 9
Esso ATF E 25131
Castrol Transmax S
Elf Elfmatic G2 Syn
Elfmatic G3
FINA Finamatic HP
Finamatic S6726
Mobil Mobil ATF
Texaco Texamatic 7045
Valvoline ATF Dextron II-E
Beverol Dextron II-E
(Fina)matic HP
JD Hygard JDMJ 20C
Total Fluide AT42
Fluidematic Syn
MOL ATF 3G
Type Classification
Shell retinax HD2 DIN 51825 KP 2 K-20
MOGUL LA 2 ISO 6743/9 CCEB 2/3, ISO - L - XBCEA 2
MOGUL LV 2M ISO 6743/9 CCEB 2/3
ÖMV signum DIN 51825-K 2 C-30
MOL Liton LT 2EP
ORLEN OIL Liten® Premium ŁT-4 EP2
Specification
ASTM D3306
ASTM D 4985
SAE J 1034
To Next Page
Loading...
Need help?
General