Information display - basic view
Information display - fault notifications
Information display -
The following values are displayed on the main display:
1. Engine revolutions (number of revolutions per minute)
2. Voltage of the tractor electrical network
3. To
tal number of operating hours
MCL18N006
If a less serious defect of the system occurs, the DTC
defect code is displayed on the display.
Simultaneously the orange engine failure signal lamp is
activated.
If there are more defects, the displayed DTC codes of
individual defects change each two seconds. The DTC
code is displayed until the defect is fixed..
If this situation occurs, stop the tractor and
contact the service centre.
MCL18N007
The hand brake symbol is displayed on the display of the
instrument panel in case that the tractor must be stopped
by braked the hand brake. Indication of the hand brake
symbol is accompanied by an acoustic signal.
More information in chapter DRIVING.
MCL18N009
ACQUAINTANCE WITH THE TRACTOR
To Next Page
Loading...
Need help?
General