Zetor MAJOR CL User Manual

Tractor user must be properly acquainted with recommended operating and safety rules for
safe tractor operation in advance. It is too late to do it within operation!
Safety cab
Opening doors from the outside
Opening doors from the inside
Use the left side of the tractor for getting in and
off the cab.
Use climbing spurs for getting on and off the cab and
hold onto a handle.
Take greater care in the area of gears lever.
NM13N088
Left cabin door is lockable from the outside. Right door of
the cabin are equipped only with a button from the
outside. After unlocking and pressing the button of the
lock the door opens by pulling the handle.
NM13N025
By pressing the button (1), doors of the cab can be
opened from the inside. Lever (2) on right door serves for
locking the lock of right door. The door lock is locked by
shifting the lever (2) in the direction of an arrow. Unlocking
is done by shifting the lever (2) against the direction of an
arrow. With total opening, the door is held by a gas prop.
We do not recommend driving with open doors
from the reason of their possible damage.
NM13N026
ACQUAINTANCE WITH THE TRACTOR
25

Zetor MAJOR CL Specifications

General

Brand	Zetor
Model	MAJOR CL
Category	Tractor
Language	English

Summary

User Safety Instructions

General Safety Regulations

Basic rules for safe tractor operation and compliance.

Engine Starting Safety

Procedures and precautions for starting the tractor engine safely.

Safe Driving Practices

Operational practices for safe driving and handling of the tractor.

Tractor Overturning Risks

Factors increasing rollover risk and prevention methods.

Fire Prevention Guidelines

Guidelines to prevent fires during operation and maintenance.

Daily Maintenance Precautions

Daily checks and maintenance tasks for the tractor's safety.

Front Loader Safety Procedures

Safe operating procedures for tractors equipped with front end loaders.

Preventive Daily Maintenance

Engine Oil Level Monitoring

Procedure for checking and maintaining the engine oil level.

Cooling System Integrity Check

Checks for leaks and coolant level in the engine cooling system.

Acquaintance with the Tractor

Information Display Interpretation

Display of operational data, fault notifications, and warning indicators.

Tractor Pedals and Differential Lock

Identification and operation of tractor pedals and the differential lock.

Gear, Direction, and PTO Controls

Operation of gear shifting, reversing levers, and PTO shaft controls.

Driving Operation

Pre-Start Engine Procedures

Pre-start checks and procedures for the engine.

Engine Starting Sequence

Step-by-step guide to starting the tractor engine safely.

Engine Starting Troubleshooting

Troubleshooting steps if the engine fails to start.

Error Signal Interpretation

Interpretation of dashboard warning lights, error codes, and signals.

Driving Away Safely

Step-by-step guide for driving the tractor away smoothly.

Differential Lock Engagement

Procedures for engaging and disengaging the differential lock.

Foot Brake Pedal Usage

Operation and connection of foot brake pedals for braking.

Tractor Stopping Procedures

Procedures for stopping the tractor using the manual brake and engine shutdown.

Running in the Tractor

New Tractor Break-in Principles

Core principles for breaking in a new tractor for the first 100 hours of operation.

Drive of Agricultural Machinery

PTO Shaft Safe Operation

Safe operation, connection, and use of PTO shafts and their covers.

PTO Shaft Control Mechanisms

Identification and function of PTO shaft control levers, buttons, and indicators.

Front PTO Shaft Operation

Specifications and operating procedures for the front PTO shaft.

Hydraulic System

Hydraulic System Components

Overview of hydraulic system components, pump, and pressure.

Internal Linkage Control Methods

Controls for three-point linkage adjustment (position, mixed, power).

External Hydraulic Circuit Usage

System for connecting external hydraulic devices via quick couplers and control elements.

Hitches

Rear Three-Point Linkage Specifications

Front Three-Point Hitch Operation

Tractor Maintenance

Service Inspection Schedule

Fluid and Filter Replacement Schedule

Maintenance Instructions

Engine Oil Level and Draining

Engine Oil Filter and Oil Replacement

Fuel Filter System Maintenance

Air Filter Element Servicing

Cooling System Coolant Replacement

Gearbox, Axle, and Hydraulic Oil Checks