Before a drive with the new tractor get to know how to shift gears and try individual positions
of the shifting lever when the engine is stopped.
During normal operation and before you set up, make sure that the technical condition ensures safe
operation of the tractor.
Before you start the engine
MCL18N014
Before starting the engine, make sure that:
1. the main gear shift of gears is in the neutral position
2. the tractor is properly braked
3. the lever for activation of the rear PTO shaft drive is in the neutral position
4. the reversing lever is in the neutral position
5. the switch of the front PTO shaft on the instrument panel is deactivated
The switching of the front or rear PTO shaft after moving the key in the switch box from the
osition 0 to the position I is indicated b
the s
mbol on the instrument panel
- Both PTO shafts are activated; move the lever for activation of the rear PTO shaft drive to the
neutral position and deactivate the switch of the front PTO shaft on the instrument panel.
B - The rear PTO shafts is activated; move the lever for activation of the rear PTO shaft drive to the
neutral position.
C - The front PTO shafts is activated; deactivate the switch of the front PTO shaft on the instrument
anel
To Next Page
Loading...
Need help?
General