alve for filling tires with liqui
Making front wheels stable
Filling tires with liquid procedure
E556
1. by heaving the tractor relieve tire and turn the wheel valve up (A)
2. let out air and unscrew the valve insertion
3. screw in the adapter for water filling, muzzle a hose for liquid inlet
4. fill the tire with a prescribed amount of liquid
5. it is possible to use head tank (B) or you can do the filling under pressure (C)
6. remove the hose and unscrew the adapter for water filling
7. screw in the insertion of a valve and inflate the tire to prescribed pressure (D)
8. after inflating screw in a protective cap on the valve
9. fill the second tire in the same wa
ll air locks of rear wheels are equipped with a valve,
which enables to fill air locks with liquid when using an
adapter.
Tubeless tires are not filled with liquid!
Filling air locks of front tires and double mounting of
rear wheels by liquid is not permitted!
NM13N104
Do not forget to lock a tractor against motion
by making front wheels stable before lifting the rear
wheels!
NM13N103
To Next Page
Loading...
Need help?
General