Zetor MAJOR CL User Manual

Before a drive make sure that the technical condition ensures safe operation of the tractor.
In case that a trailer or implement is coupled, verify its coupling and proper fixing of the load.
Never get out of the tractor to couple a trailer yourself. Pay also attention to your assistant.
Front hook
Depending on the tractor equipment, the front hitch is available in various versions.
For fixing the tow bar or tow rope to the front hitch always use the original pin which must be secured against
extrusion with original lock.
MCLN034
Used only for towing tractor without connected trailer or a different connected machinery.
Use a drawbar or a cable for releasing tractor. Never use chains! The possibility of fatal injury
if a chain pulls apart!
It is forbidden to use tractor axles (individual travelling wheels) such as reeling jack when rescuing
a sunken tractor.
Multistage adjustable suspension
Vertical adjustment and multistage suspension disassembly
Serves for connecting double axle or lighter single-axle
trailers. Guidance nozzle is vertically adjustable. When
working with various agricultural machines it is necessary
to adjust the suspension vertically or demount where
necessary.
E302
After pushing the catch (1), control lever (2) is unlocked,
by subsequent shift of the lever (2) in the direction of an
arrow multistage suspension is released and it is possible
to adjust it vertically or disassemble. After adjusting
multistage suspension, shift the lever (2) back to the
original position until the catch (2) is released.
NM13N024
TRANSPORTATION
57

Zetor MAJOR CL Specifications

General

Brand	Zetor
Model	MAJOR CL
Category	Tractor
Language	English

Summary

User Safety Instructions

General Safety Regulations

Basic rules for safe tractor operation and compliance.

Engine Starting Safety

Procedures and precautions for starting the tractor engine safely.

Safe Driving Practices

Operational practices for safe driving and handling of the tractor.

Tractor Overturning Risks

Factors increasing rollover risk and prevention methods.

Fire Prevention Guidelines

Guidelines to prevent fires during operation and maintenance.

Daily Maintenance Precautions

Daily checks and maintenance tasks for the tractor's safety.

Front Loader Safety Procedures

Safe operating procedures for tractors equipped with front end loaders.

Preventive Daily Maintenance

Engine Oil Level Monitoring

Procedure for checking and maintaining the engine oil level.

Cooling System Integrity Check

Checks for leaks and coolant level in the engine cooling system.

Acquaintance with the Tractor

Information Display Interpretation

Display of operational data, fault notifications, and warning indicators.

Tractor Pedals and Differential Lock

Identification and operation of tractor pedals and the differential lock.

Gear, Direction, and PTO Controls

Operation of gear shifting, reversing levers, and PTO shaft controls.

Driving Operation

Pre-Start Engine Procedures

Pre-start checks and procedures for the engine.

Engine Starting Sequence

Step-by-step guide to starting the tractor engine safely.

Engine Starting Troubleshooting

Troubleshooting steps if the engine fails to start.

Error Signal Interpretation

Interpretation of dashboard warning lights, error codes, and signals.

Driving Away Safely

Step-by-step guide for driving the tractor away smoothly.

Differential Lock Engagement

Procedures for engaging and disengaging the differential lock.

Foot Brake Pedal Usage

Operation and connection of foot brake pedals for braking.

Tractor Stopping Procedures

Procedures for stopping the tractor using the manual brake and engine shutdown.

Running in the Tractor

New Tractor Break-in Principles

Core principles for breaking in a new tractor for the first 100 hours of operation.

Drive of Agricultural Machinery

PTO Shaft Safe Operation

Safe operation, connection, and use of PTO shafts and their covers.

PTO Shaft Control Mechanisms

Identification and function of PTO shaft control levers, buttons, and indicators.

Front PTO Shaft Operation

Specifications and operating procedures for the front PTO shaft.

Hydraulic System

Hydraulic System Components

Overview of hydraulic system components, pump, and pressure.

Internal Linkage Control Methods

Controls for three-point linkage adjustment (position, mixed, power).

External Hydraulic Circuit Usage

System for connecting external hydraulic devices via quick couplers and control elements.

Hitches

Rear Three-Point Linkage Specifications

Front Three-Point Hitch Operation

Tractor Maintenance

Service Inspection Schedule

Fluid and Filter Replacement Schedule

Maintenance Instructions

Engine Oil Level and Draining

Engine Oil Filter and Oil Replacement

Fuel Filter System Maintenance

Air Filter Element Servicing

Cooling System Coolant Replacement

Gearbox, Axle, and Hydraulic Oil Checks