ABB CL-LMR 18AC2 Series User Manual

Year time switch
169
1SVC 440 795 M0100
Changing time switch channel
You can the change time switch channel in either RUN or
STOP mode by selecting the channel required with the cursor
buttons
ÍÚ.
Example:
The display on the left shows the parameter display of a year
time switch.
X Press the Í button to move the cursor to channel B.
Press the
í button to reach any value that can be edited.
Entry rules
The following nine entry rules are possible.
Display format: XX = digit used
Rule 1
ON: Day
OFF: Day
Y4 A +
ON 01.01.04
OFF 31.03.04
â
Y4 B +
ON 01.10.04
OFF 31.12.04
#
h
Important input rules.
The year time switch only operates properly by observing
the following rules.
The on year must not be later than the off year.
ON and OFF times must have the same parameters.
Example: ON = Year, OFF = Year; ON = Year/Month,
OFF = Year/Month
Y1 A +
ON XX.--.--
OFF XX.--.--

ABB CL-LMR 18AC2 Series Specifications

General

Brand	ABB
Model	CL-LMR 18AC2 Series
Category	Relays
Language	English