ABB REC650 ANSI User Manual

Table 482: PRPSTATUS Output signals
Name Type Description
LAN1-A BOOLEAN LAN1 channel A status
LAN1-B BOOLEAN LAN1 channel B status
14.10.4 Setting parameters
The PRPSTATUS function has no user settings.
However, the redundant communication is configured in the LHMI under Main menu/
Configuration/Communication/TCP-IP configuration/ETHLAN1_AB where
Operation mode, IPAddress and IPMask are configured.
14.11 Activity logging parameters ACTIVLOG
14.11.1 Activity logging ACTIVLOG
ACTIVLOG contains all settings for activity logging.
There can be 6 external log servers to send syslog events to. Each server can be configured
with IP address; IP port number and protocol format. The format can be either syslog
(RFC 5424) or Common Event Format (CEF) from ArcSight.
14.11.2 Settings
Table 483: ACTIVLOG Non group settings (basic)
Name
Values (Range) Unit Step Default Description
ExtLogSrv1Type Disabled
ExtLogSrv1Type
SYSLOG TCP/IP
CEF TCP/IP
-
- Disabled External log server 1 type
ExtLogSrv1Port 1 - 65535 - 1 514 External log server 1 port number
ExtLogSrv1IP 0 - 18 IP
Address
1 127.0.0.1 External log server 1 IP-address
ExtLogSrv2Type Disabled
ExtLogSrv1Type
SYSLOG TCP/IP
CEF TCP/IP
-
- Disabled External log server 2 type
ExtLogSrv2Port 1 - 65535 - 1 514 External log server 2 port number
ExtLogSrv2IP 0 - 18 IP
Address
1 127.0.0.1 External log server 2 IP-address
Table continues on next page
Section 14 1MRK 511 287-UUS A
Station communication
580
Technical manual

ABB REC650 ANSI Specifications

General

Brand	ABB
Model	REC650 ANSI
Category	Controller
Language	English