15.2 Time synchronization
15.2.1 Functionality
The time synchronization source selector is used to select a common source of absolute
time for the IED when it is a part of a control and a protection system. This makes it
possible to compare event and disturbance data between all IEDs in a station automation
system.
Micro SCADA OPC server should not be used as a time synchronization
source.
15.2.2 Time synchronization TIMESYNCHGEN
15.2.2.1 Identification
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Time synchronization TIMESYNCHGE
N
- -
15.2.2.2 Settings
Table 491: TIMESYNCHGEN Non group settings (basic)
Name
Values (Range) Unit Step Default Description
CoarseSyncSrc Disabled
SNTP
DNP
IEC60870-5-103
-
- Disabled Coarse time synchronization source
FineSyncSource Disabled
SNTP
IRIG-B
-
- Disabled Fine time synchronization source
SyncMaster Disabled
SNTP-Server
- - Disabled Activate IED as synchronization master
Section 15 1MRK 511 287-UUS A
Basic IED functions
590
Technical manual
To Next Page
Need help?
General
