15.7.3 Settings
The function does not have any parameters available in the local HMI or PCM600.
15.8 Primary system values PRIMVAL
15.8.1 Identification
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Primary system values PRIMVAL - -
15.8.2 Functionality
The rated system frequency and phasor rotation are set under Main menu/
Configuration/ Power system/ Primary values/PRIMVAL in the local HMI and
PCM600 parameter setting tree.
15.8.3 Settings
Table 507: PRIMVAL Non group settings (basic)
Name
Values (Range) Unit Step Default Description
Frequency 50.0 - 60.0 Hz 10.0 50.0 Rated system frequency
PhaseRotation Normal=ABC
Inverse=ACB
- - Normal=ABC System phase rotation
15.9 Signal matrix for analog inputs SMAI
15.9.1 Functionality
Signal matrix for analog inputs function (SMAI), also known as the preprocessor
function, processes the analog signals connected to it and gives information about all
aspects of the analog signals connected, like the RMS value, phase angle, frequency,
harmonic content, sequence components and so on. This information is then used by the
respective functions in ACT (for example protection, measurement or monitoring).
The SMAI function is used within PCM600 in direct relation with the Signal Matrix tool
or the Application Configuration tool.
Section 15 1MRK 511 287-UUS A
Basic IED functions
608
Technical manual
To Next Page
Loading...
Need help?
General
