Section 1 Introduction
1.1 This manual
The application manual contains application descriptions and setting guidelines
sorted per function. The manual can be used to find out when and for what purpose a
typical protection function can be used. The manual can also provide assistance for
calculating settings.
1.2 Intended audience
This manual addresses the protection and control engineer responsible for planning,
pre-engineering and engineering.
The protection and control engineer must be experienced in electrical power
engineering and have knowledge of related technology, such as protection schemes
and communication principles.
1MRK 502 071-UEN - Section 1
Introduction
Generator protection REG670 2.2 IEC and Injection equipment REX060, REX061, REX062 21
Application manual
To Next Page
Loading...
Need help?
General
