AudioCodes Mediant 3000 Hardware Installation Manual

Version 7.0 49 Mediant 3000
Hardware Installation Manual 5. Cabling the Device
5 Cabling the Device
This section describes how to cable the device:

Connecting to earth (ground) the chassis – see Section 5.1 on page 49

Connecting the PSTN interfaces:
• For chassis with TP-6310 / RTM-6310:
♦ Connecting to STM-1/OC-3 interfaces – see Section 5.2.1 on page 51
♦ Connecting to T3 interfaces – see Section 5.2.2 on page 53
• For chassis with TP-8410 / RTM-8410:
♦ Connecting to E1/T1 PSTN interfaces – see Section 5.3.1 on page 56

Connecting to Gigabit Ethernet (GbE) interfaces:
• For chassis with TP-6310 / RTM-6310:
♦ Connecting to GbE interfaces - see Section 5.2.3 on page 54
• For chassis with TP-8410 / RTM-8410:
♦ Connecting Ethernet interfaces to OAMP and Control IP networks – see
Section 5.3.2 on page 60
♦ Connecting to GbE interfaces – see Section 5.3.3 on page 62

Connecting BITS trunk sources for clock synchronization – see Section 5.4 on page 64

Connecting to an external Telco alarm equipment – see Section 5.5 on page 66

Connecting RS-232 interface for serial communication with a computer – see Section
5.6 on page 68

Connecting to power – see Section 5.7 on page 68

AudioCodes Mediant 3000 Specifications

General

Brand	AudioCodes
Model	Mediant 3000
Category	Gateway
Language	English