User's Manual 124 Document #: LTRT-50614
MP-20x Multimedia Home Gateway
To set traffic priority rules:
1. From the menu bar, click the QoS menu, and then select the Traffic Priority tab; the
'Traffic Priority' screen appears.
Figure 11-7: Traffic Priority Screen
This screen is divided into two identical groups - ’QoS Input Rules’ and ’QoS Output Rules’
- for prioritizing inbound and outbound traffic respectively. Each group lists all the devices
on which rules can be set. You can set rules on all devices at once by clicking the New
Entry link corresponding to 'All Devices'
To Next Page
Loading...
Need help?
General
