AudioCodes MP-20 Series User Manual

User's Manual 9. Configuring VoIP Parameters
Version 4.4.3 73 MP-20x Multimedia Home Gateway
9 Configuring VoIP Parameters
The VoIP parameters are mainly configured in the 'Voice over IP' screen. This screen is
accessed by clicking the Voice over IP menu in the side menu bar. The ‘Voice over IP'
screen provides tabs for configuring the following:

Signaling protocol (i.e., Session Initiation Protocol / SIP) – see Section 9.1 on page 73

Dialing – see Section 9.2 on page 80

Media streaming – see Section 9.3 on page 88

Voice and fax – see Section 9.4 on page 91

Supplementary services – see Section 9.5 on page 96

Line settings – see Section 9.6 on page 99

Line extensions – see Section 9.8 on page 105

Speed dials – see Section 9.9 on page 107

Telephone interfaces – see Section 9.10 on page 109
Notes:
• By default, the ‘Voice over IP’ screens initially display only basic parameters. To view
all the parameters, click the Advanced button in the required screen.
• Once you have configured the VoIP parameters, you can start using your analog
telephones, as described in Chapter 10 on page 111.

AudioCodes MP-20 Series Specifications

General

Brand	AudioCodes
Model	MP-20 Series
Category	Adapter
Language	English